Frogfoot Fibre

We’ve put together this guide to make your Frogfoot installation process as smooth as possible.

This guide includes a lot of information, with some important things for you to do, and think about. We feel that you should rather have too much info than too little at this point. Please make sure to read the points at the end if you’re in a TL;DR mood!

Routers and settings:
You can also use your own router and configure it yourself – just make sure of is to set it to DHCP/Dynamic IP. We have most router settings on this page of our website: https://www.atomicaccess.co.za/docs/router-settings/.

If you ordered a router from Atomic, we’ll arrange to configure it and deliver it.

Power for hardware requirements:

  • One is for the ONT device that Octotel will install (Optical Network Terminal, equivalent to a fibre modem).
  • The other is for your WiFi router.

The Install

  • The fibre installation is something the Fibre Network Operator (FNO), Frogfoot, handles (not Atomic).
  • While the FNO do many of the installs themselves, they also contract some of the work out.
  • Your FNO will sometimes attach a PDF explaining the details about your install.
  • Worth noting that the installation teams coming into your home, are doing so for the first time, so it is your responsibility to point out hazards and areas you don’t want them to run fibre.
  • Depending on your install difficulty, they will likely be drilling into/through walls, and this means you will need to advise if there are any water mains pipes, electric cables or other hazards where the drilling will take place.
  • The first 30m of the install is covered by the standard installation fee. The installation team will communicate about any additional costs.
  • Lifting of paving and repaving is not included in the installation cost. If you have a long driveway or need trenches dug the installation crew will have to quote.
  • If you have existing conduits you would like to use they need to be in an excellent state of repair, with no gaps or holes and have a draw string to pull the fibre cable through. If your conduit is damaged or does not have a draw string, it cannot be used.
  • NB: If you have any issues with the installation taking place, please raise this with the installation team during the install (if possible) as they are most likely able to deal with your issues then (and getting them to come back in a timely manner can be a challenge).

Tips and tricks to make the installation go smoothly.

Here are some examples of what an Frogfoot installation will look like when completed. The black box on the left is the ONT. The ONT and your WiFi router will require two available plugs and needs to be close to your each other.

Frogfoot-Fibre-Equipment-ATB-and-ONT

  • First thing you need to think about is where you’d like your router to eventually go (within reason). Bear in mind that both the devices your FNO install and your router need to be within range of a plug. The technicians can help advise on this if you are unsure.
  • Be clear about where you want cables to run and where you want boxes to be attached to your walls. Explain how you want things to look and if you want to hide any parts of the installation. Be explicit, the cables and boxes are not going to be moving after they have been installed.
  • If you have a garden or you need cable running outside the technicians will need to run trunking pipes for the Fibre to run through. When the technicians run the pipe please check it looks nice before they attach it to your property.
  • Please note the install team is limited to using plastic trunking to cover the fibre line outside- lifting of paving and putting it back is not included. They are meant to be in and out in under 2 hours, so if you need special consideration for your installation this will need to be planned before hand and is not part of a regular installation scope.

How long it takes to actually get onto the internet:

  • Most of the time you will probably be online immediately after installation.
  • In some small cases there are hickups, please be patient and let us know and we will do our best to help. The technicians on site should be able answer this during the install.
  • You will get an automated email and SMS as soon as your line goes live so you are not left guessing.

Recap of key points:

  • Please ensure you are at home during the installation. An adult needs to be at home to instruct the installers and also sign for approval. It’s a bad idea to leave written notes and to get your domestic helper to instruct the installers and approve the installation.
  • You should be live immediately after the installation, but in very rare occasions or pre-live installations it might take a little longer.
  • You will need two 2-prong plug points.
  • Please also let us know your line signal so we can make a note of that.
  • The fibre equipment remains the property of Frogfoot, damage or loss will result in replacement costs. Please leave the fibre boxes and power supply if you move.
  • Billing starts once you are live and you will get your invoice via email at the end of your first month. Any partial month will be billed pro-rata from the day after you are activated.

We hope this helps make your installation process smoother and you’re better able to get the most out of your install. If you have more suggestions, tips or questions that might help other customers please let us know.